Design of a DC Busbar for the ITER PF Converter

GUO Bin(郭斌); SONG Zhiquan(宋执权); XU Liuwei(许留伟); ZHANG Ming(张明); LI Jinchao(李金超); JIANG Li(蒋力); FU Peng(傅鹏); WANG Min(王敏); DONG Lin(董琳)

doi:10.1088/1009-0630/16/4/19

Plasma Science and Technology > 2014 > 16(4): 406-409. > DOI: 10.1088/1009-0630/16/4/19

GUO Bin(郭斌), SONG Zhiquan(宋执权), XU Liuwei(许留伟), ZHANG Ming(张明), LI Jinchao(李金超), JIANG Li(蒋力), FU Peng(傅鹏), WANG Min(王敏), DONG Lin(董琳). Design of a DC Busbar for the ITER PF Converter[J]. Plasma Science and Technology, 2014, 16(4): 406-409. DOI: 10.1088/1009-0630/16/4/19

Citation:

PDF (4238 KB)

Design of a DC Busbar for the ITER PF Converter

1 College of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China 2 State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Wuhan 430073, China 3 Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China 4 China International Nuclear Fusion Energy Program Execution Center, Beijing 100862, China

More Information

Received Date: November 04, 2012

Graphical Abstract

Abstract

Abstract

The DC busbar is an important component for the ITER PF converter module to connect the converter and the reactor. This paper analyzes different cross-sections and different thermodynamic properties under natural-cooling and water-cooling conditions, and simulation is carried out by the software of the finite element method (FEM). The result of the analysis shows that the water-cooling method is the better choice for the DC busbar.
- cross-section,
- temperature,
- natural-cooling,
- water-cooling,
- DC busbar

FullText(HTML)

References (12)

References

1 ITER. 2005, Design Description Document DDD 16,Pulsed Power Supplies, France;

2 OHN HUS, S M. 1990, IEEE Transactions on Industry Applications, 26: 926;

3 Yang Shiming, Tao Wenquan. 2006, Heat Transfer. Higher Education Press, Beijing (in Chinese) ;

4 Rohsenow Warren M, Hartnett James R, et al. 1998,Handbook of Heat Transfer. McGraw-Hill, New York;

5 Yang S M, Z.Z.Z. 1994, An experimental study of nat-ural convection heat transfer from horizontal cylinder in high Rayleigh number laminar and turbulent region. Proceeding of 10th International Heat Transfer Con-ference. 7: 185;

6 Morgan V T. 1975, The Overall Convective Heat Transfer from Smooth Circular Cylinders. Advances in Heat Transfer. Vol.11, Academic Press;

7 Wu Lijian. 1985, The Theory and Analysis for the Bus-bar of Large Current. China Water Power Press, Bei-jing (in Chinese) ;

8 Shah R K, J. S. D. 1987, Handbook of Single-Phase Convective Heat Transfer. Wiley-Intersience,New York;

9 Fishenden M, Saunders O A. 1950, An Introduction To Heat Transfer. ;

10 Gnielinski V. 1976, New equations for heat mass trans-fer in turbulent pipe and channel °ows. Int. Chem.Eng. p.359;

11 Zhao Bo, Zhang Hongliang. 2010, The Application of Ansoft 12 in the Electromagnetic Engineer Fields.China Waterpower Press, Beijing (in Chinese) ;

12 Yu Yong. 2008, Introductory and Advanced Course Book for Fluent. Beijing Institute of Technology Press,Beijing (in Chinese)

[1]	ubao JIN (金福宝), Yuanxiang ZHOU (周远翔), Bin LIANG (梁斌), Zhongliu ZHOU (周仲柳), Ling ZHANG (张灵). Effects of temperature on creepage discharge characteristics in oil-impregnated pressboard insulation under combined AC–DC voltage[J]. Plasma Science and Technology, 2019, 21(5): 54002-054002. DOI: 10.1088/2058-6272/aaff01
[2]	Guozhan LI (李国占), Jianyang YU (俞建阳), Huaping LIU (刘华坪), Fu CHEN (陈浮), Yanping SONG (宋彦萍). A saw-tooth plasma actuator for film cooling efficiency enhancement of a shaped hole[J]. Plasma Science and Technology, 2017, 19(8): 85505-085505. DOI: 10.1088/2058-6272/aa6744
[3]	Zhigang ZHU (朱志刚), Qiyong ZHANG (张启勇), Yuntao SONG (宋云涛), Ming ZHUANG (庄明), Zhiwei ZHOU (周芷伟), Anyi CHENG (成安义), Ping ZHU (朱平). Present status and one upgrading method with a cold compressor of the EAST sub-cooling helium cryogenic system[J]. Plasma Science and Technology, 2017, 19(5): 55603-055603. DOI: 10.1088/2058-6272/aa58da
[4]	GUO Bin (郭斌 ), SONG Zhiquan (宋执权 ), FU Peng (傅鹏 ), JIANG Li (蒋力 ), LI Jinchao (李金超), WANG Min (王敏), DONG Lin (董琳). Thermal Dissipation Modelling and Design of ITER PF Converter Alternating Current Busbar[J]. Plasma Science and Technology, 2016, 18(10): 1049-1054. DOI: 10.1088/1009-0630/18/10/14
[5]	ZHANG Jingyang (张镜洋), HAN Le (韩乐), CHANG Haiping (常海萍), LIU Nan (刘楠), XU Tiejun (许铁军). The Corrected Simulation Method of Critical Heat Flux Prediction for Water-Cooled Divertor Based on Euler Homogeneous Model[J]. Plasma Science and Technology, 2016, 18(2): 190-196. DOI: 10.1088/1009-0630/18/2/16
[6]	LI Lei (李磊), YAO Damao (姚达毛), LIU Changle (刘常乐), ZHOU Zibo (周自波), CAO Lei (曹磊), LIANG Chao (梁超). Optimization of the Water-Cooled Structure for the Divertor Plates in EAST Based on an Orthogonal Theory[J]. Plasma Science and Technology, 2015, 17(5): 435-440. DOI: 10.1088/1009-0630/17/5/12
[7]	Emmanouil D. FYLLADITAKIS, Antonios X. MORONIS, Konstantinos KIOUSIS. Design of a Prototype EHD Air Pump for Electronic Chip Cooling Applications[J]. Plasma Science and Technology, 2014, 16(5): 491-501. DOI: 10.1088/1009-0630/16/5/09
[8]	LI Tianming (李天明), Sooseok CHOI, Takayuki WATANABE. Discharge Characteristics of DC Arc Water Plasma for Environmental Applications[J]. Plasma Science and Technology, 2012, 14(12): 1097-1101. DOI: 10.1088/1009-0630/14/12/11
[9]	SHENG Zhicai (盛志才), XU Liuwei (许留伟), FU Peng (傅鹏). Design and Analysis of the Main AC/DC Converter System for ITER[J]. Plasma Science and Technology, 2012, 14(4): 338-342. DOI: 10.1088/1009-0630/14/4/13
[10]	CHEN Peng, FU Peng, SONG Zhiquan. Design of Balanced Reactor Welded with Water-Cooled Aluminum Busbars[J]. Plasma Science and Technology, 2011, 13(2): 242-245.