Wire-to-Plate Surface Dielectric Barrier Discharge and Induced Ionic Wind

ZHANG Yu (张宇); LIU Lijuan (刘莉娟); LI Ben (李犇); OUYANG Jiting (欧阳吉庭)

doi:10.1088/1009-0630/18/6/09

Plasma Science and Technology > 2016 > 18(6): 634-640. > DOI: 10.1088/1009-0630/18/6/09

ZHANG Yu (张宇), LIU Lijuan (刘莉娟), LI Ben (李犇), OUYANG Jiting (欧阳吉庭). Wire-to-Plate Surface Dielectric Barrier Discharge and Induced Ionic Wind[J]. Plasma Science and Technology, 2016, 18(6): 634-640. DOI: 10.1088/1009-0630/18/6/09

Citation:

PDF (434 KB)

Wire-to-Plate Surface Dielectric Barrier Discharge and Induced Ionic Wind

School of Physics, Beijing Institute of Technology, Beijing 100081, China

Funds: supported by National Natural Science Foundation of China (Nos. 11175017 and 11475019)

More Information

Received Date: August 23, 2015

Graphical Abstract

Abstract

Abstract

The electrical and mechanical characteristics of the wire-to-plate surface dielectric barrier discharge and the induced ionic wind are investigated experimentally. The different tempo?ral behaviors in positive and negative half-cycles are studied by time-resolved images. It is shown that the discharge and the light emission are generally stronger in the positive half cycle. The discharge is inhomogeneous and propagates in streamer mode; however, in the negative half-cycle, the discharge appears visually uniformly and operates in the diffuse mode. The surface discharge can produce ionic wind about several m/s above the dielectric surface. There exists an optimal width of the grounded electrode to produce a larger plasma area or active wind region. Increas?ing of the applied voltage or normalized dielectric constant leads to a larger wind velocity. The performance of ionic wind on flow control is visualized by employing a smoke stream.
- surface dielectric barrier discharge,
- wire-to-plate configuration,
- ionic wind,
- flow control

FullText(HTML)

References (1)

References

1 Moreau E. 2007, J. Phys. D: Appl. Phys., 40: 605 2 Mestiri R, Hadaji R, Nasrallah S B. 2010, Phys. Plasmas, 17: 083503 3 Benard N, Balcon N, Moreau E. 2008, J. Phys. D:Appl. Phys., 41: 042002 4 Thomas F O, Corke T C, Iqbal M, et al. 2009, AIAA J., 47: 2169 5 Corke T C, Post M L, Orlov D M. 2007, Progress in Aerospace Sciences, 43: 193 6 Roth J R. 2003, Phys. Plasmas, 10: 2117 7 Benard N, Moreau E. 2010, J. Phys. D: Appl. Phys.,43: 145201 8 Enloe C L, McLaughlin T E, Van Dyken R D, et al.2004, AIAA J., 42: 589 9 Boeuf J P, Pitchford L C. 2005, J. Appl. Phys., 97:103307 10 Boeuf J P, Lagmich Y, Callegari T, et al. 2006, Electrohydrodynamic force and acceleration in surface discharges. In 37th AIAA Pasmasdynamics and Lasers Conference. San Francisco, California 11 Boeuf J P, Lagmich Y, Unfer T, et al. 2007, J. Phys.D: Appl. Phys., 40: 652 12 Huang P G, Shang J S, Stanfield S A. 2011, AIAA J.,49: 119 13 Boeuf J P, Lagmich Y, Pitchford L C. 2009, J. Appl.Phys., 106: 023115 14 Jolibois J, Forte M, Moreau E. 2008, J. Electrost., 66:496 15 Moreau E, Louste C, Touchard G. 2008, J. Electrost.,66: 107 16 Sujar-Garrido P, Benard N, Moreau E. 2015, Exp. Fluids, 56: 1 17 Magnier P, Hong D, Leroy-Chesneau A, et al. 2007,Exp. Fluids, 42: 815 18 Debien A, Benard N, David L, et al. 2012, Appl. Phys.Lett., 100: 013901 19 Debien A, Benard N, Moreau E. 2012, J. Phys. D:Appl. Phys., 45: 215201 20 Benard N, Debien A, Moreau E. 2013, J. Phys. D:Appl. Phys., 46: 245201 21 Benard N, Moreau E. 2014, Exp. Fluids, 55: 1 22 Jolibois J, Zouzou N, Moreau E, et al. 2011, J. Electrost., 69: 522 23 Orlov D M, Font G I, Edelstein D. 2008, AIAA J., 46:3142 24 Ouyang J, Feng C, Huang H, et al. 1998, J. Appl.Phys., 84: 6943 25 Ouyang J. 1999. Chin. Phys. Lett., 16: 574 26 Zhang Y, Liu L, Ouyang J. 2014, J. Electrost., 72: 76 27 Mestiri R, Hadaji R, Nasrallah S B. 2008, Desalination, 220: 468 28 Forte M, Jolibois J, Pons J, et al. 2007, Exp. Fluids, 43: 917

[1]	Maoyang LI, Chaochao MO, Jiali CHEN, Peiyu JI, Haiyun TAN, Xiaoman ZHANG, Meili CUI, Lanjian ZHUGE, Xuemei WU, Tianyuan HUANG. Effects of power on ion behaviors in radio-frequency magnetron sputtering of indium tin oxide (ITO)[J]. Plasma Science and Technology, 2024, 26(7): 075506. DOI: 10.1088/2058-6272/ad3599
[2]	Falun SONG (宋法伦), Fei LI (李飞), Mingdong ZHU (朱明冬), Langping WANG (王浪平), Beizhen ZHANG (张北镇), Haitao GONG (龚海涛), Yanqing GAN (甘延青), Xiao JIN (金晓). Development and experimental study of large size composite plasma immersion ion implantation device[J]. Plasma Science and Technology, 2018, 20(1): 14013-014013. DOI: 10.1088/2058-6272/aa88b0
[3]	Ling ZHANG (张玲), Guo CHEN (陈果), Zhibing HE (何智兵), Xing AI (艾星), Jinglin HUANG (黄景林), Lei LIU (刘磊), Yongjian TANG (唐永建), Xiaoshan HE (何小珊). Investigation of working pressure on the surface roughness controlling technology of glow discharge polymer films based on the diagnosed plasma[J]. Plasma Science and Technology, 2017, 19(7): 75505-075505. DOI: 10.1088/2058-6272/aa6618
[4]	HU Guanghai (胡广海), JIN Xiaoli (金晓丽), YUAN Lin (袁林), ZHANG Qiaofeng (张乔枫), XIE Jinlin (谢锦林), LI Hong (李弘), LIU Wandong (刘万东). Oxide Coated Cathode Plasma Source of Linear Magnetized Plasma Device[J]. Plasma Science and Technology, 2016, 18(9): 918-923. DOI: 10.1088/1009-0630/18/9/08
[5]	LIU Jinbo(刘金波), LU Ronghua(陆荣华), GUO Li(郭丽), JIN Yuqi(金玉奇), GUO Jingwei(郭敬为). Long Lifetime Ultracold Plasma Produced by a Nanosecond Laser in a Supersonic Nitric Oxide Molecular Beam Environment[J]. Plasma Science and Technology, 2014, 16(4): 305-310. DOI: 10.1088/1009-0630/16/4/01
[6]	LI Zebin(李泽斌), WU Zhonghang(吴忠航), JU Jiaqi(居家奇), HE Kongduo(何孔多), CHEN Zhenliu(陈枕流), YANG Xilu(杨曦露), YAN Hang(颜航), OU Qiongrong(区琼荣), LIANG Rongqing(梁荣庆). Enhanced Work Function of Al-Doped Zinc-Oxide Thin Films by Oxygen Inductively Coupled Plasma Treatment[J]. Plasma Science and Technology, 2014, 16(1): 79-82. DOI: 10.1088/1009-0630/16/1/17
[7]	V. PRYSIAZHNYI. Plasma Treatment of Aluminum Using a Surface Barrier Discharge Operated in Air and Nitrogen: Parameter Optimization and Related Effects[J]. Plasma Science and Technology, 2013, 15(8): 794-799. DOI: 10.1088/1009-0630/15/8/15
[8]	Jeong Woo YUN. The Effect of Plasma Surface Treatment on a Porous Green Ceramic Film with Polymeric Binder Materials[J]. Plasma Science and Technology, 2013, 15(6): 521-527. DOI: 10.1088/1009-0630/15/6/07
[9]	K. Mikaili AGAH, M. GHORANNEVISS, M. K. SALEM, A. Salar ELAHI, S. MOHAMMADI, R. ARVIN. Increase of Diagnostic Mirror Lifetime Using TiN Coated Stainless Steel by Using a Plasma Focus Device[J]. Plasma Science and Technology, 2013, 15(5): 485-488. DOI: 10.1088/1009-0630/15/5/18
[10]	ZHENG Yanbin (郑艳彬), LI Guang (李光), WANG Wenlong (王文龙), LI Xiuchang (李秀昌), JIANG Zhigang(姜志刚). Dry Etching Characteristics of Amorphous Indium-Gallium-Zinc-Oxide Thin Films[J]. Plasma Science and Technology, 2012, 14(10): 915-918. DOI: 10.1088/1009-0630/14/10/11