Equation of Energy Injection to a Dielectric Barrier Discharge Reactor

YAO Shuiliang (姚水良); WENG Shan (翁珊); JIN Qi (金旗); HAN Jingyi (韩竞一); JIANG Boqiong (江博琼); WU Zuliang (吴祖良)

doi:10.1088/1009-0630/18/8/03

Plasma Science and Technology > 2016 > 18(8): 804-811. > DOI: 10.1088/1009-0630/18/8/03

YAO Shuiliang (姚水良), WENG Shan (翁珊), JIN Qi (金旗), HAN Jingyi (韩竞一), JIANG Boqiong (江博琼), WU Zuliang (吴祖良). Equation of Energy Injection to a Dielectric Barrier Discharge Reactor[J]. Plasma Science and Technology, 2016, 18(8): 804-811. DOI: 10.1088/1009-0630/18/8/03

Citation:

PDF (388 KB)

Equation of Energy Injection to a Dielectric Barrier Discharge Reactor

School of Environmental Science and Engineering, Zhejiang Gongshang University, Hangzhou 310018, China

Funds: supported by National Natural Science Foundation of China (No. 11575159), Zhejiang Provincial Natural Science Foundation of China (No. LY13B070004), Program for Zhejiang Leading Team of S&T Innovation (No. 2013TD07), and National Natural Science Foundation of China (No. 51206146)

More Information

Received Date: September 28, 2015

Graphical Abstract

Abstract

Abstract

The electric energy injection from a pulsed power supply to a planar type of dielectric barrier discharge (DBD) reactor at atmospheric pressure was studied. Relations of the energy injection with barrier materials, barrier thickness, peak voltage, gap distance, electrode area, and operation temperature were experimentally investigated. The energy injection is a function of relative permittivity, barrier thickness, peak voltage, gap distance, and electrode area. The influence of operation temperature on energy injection is slight in the range of 27–300^oC but becomes obvious in the range of 300–500^oC. A model was established using which the energy injection can be easily predicted.
- DBD,
- pulsed discharge,
- unit energy injection model,
- breakdown voltage,
- Paschen curve

FullText(HTML)

References (1)

References

1 Wei L, Yuan D, Zhang Y, et al. 2014, Eur. Phys. J. D, 68: 17 2 Sung T L, Teii S, Liu C M, et al. 2013, Vacuum, 90: 65 3 Das T N, Dey G R. 2013, Journal of Hazardous Materials, 248-249: 469 4 Zhang X, Cha M S. 2015, Proc. Combust. Inst., 35: 3447 5 Liang P, Jiang W, Zhang L, et al., 2015, Process Saf. Environ. Prot., 94: 380 6 Jahanmiri A, RahimpourMR, Mohamadzadeh Shirazi M, et al. 2012, Chem. Eng. J., 191: 416 7 Zhao D Z, Shi C, Li X S, et al. 2012, Journal of Hazardous Materials, 239-240: 362 8 Wang H, Li D, Wu Y, et al. 2009, J. Electrostat., 67: 547 9 Xu X, Wang P, Xu W, et al. 2016, Chem. Eng. J., 283: 276 10 Xiao G, Xu W, Wu R, et al. 2014, Plasma Chem. Plasma Process., 34: 1033 11 Aggelopoulos C A, Svarnas P, Klapa M I, et al. 2015, Chem. Eng. J., 270: 428 12 Balc3o?glu I A, Sara?c C, K3v3lc3mdan C, et al. 2006, Ozone: Sci. Eng., 28: 431 13 Heuer K, Ho?manns M A, Demir E, et al. 2015, Nitric Oxide, 44: 52 14 Xu J, Zhang C, Shao T, et al. 2014, J. Electrostat., 71: 435 15 Shahidi S, Ghoranneviss M, Shariˉ S D. 2014, J. Fusion Energ., 33: 177 16 Naito S, Takahara H. 2006, Ozone: Sci. Eng., 28: 425 17 Moscosa-Santillan M, Vincent A, Santirso E, et al. 2008, J. Clean. Prod., 16: 198 18 Obradovic B M, Sretenovic G B, Kuraica M M. 2011, J. Hazard. Mater., 185: 1280 19 Fu M, Lin J, Zhu W, et al. 2014, J. Rare Earths, 32: 153 20 Tang X, Lu H, Lin L, et al. 2013, Plasma Chem. Plasma Process., 33: 281 21 Kriegseis J, M?oller B, Grundmann S, et al. 2001, J. Electrostat., 69: 302 22 Zhang C, Shao T, Yu Y, et al. 2010, J. Electrostat., 68: 445 23 Manley T C. 1943, Trans. Electrochem. Soc., 84: 83 24 Yao S, Wu Z, Han J, et al. 2015, J. Electrostat., 75: 35 25 Shao T, Long K, Zhang C, et al. 2009, J. Electrostat., 67: 215 26 Shao T, Zhang C, Fang Z, et al. 2010, IEEE Trans. Plasma Sci., 41: 3069 27 Fridman A, Chirokov A, Gutsol A. 2005, J. Phys. D: Appl. Phys., 38: R1 28 Johnson T V. 2010, SAE Int. J. Fuels Lubr, 3: 16 29 Chen L Y, Hunter G W. 2004, Temperature dependent dielectric properties of polycrystalline 96%Al2O3. MRS Fall Meeting, Boston, MA 30 Chang J S, Kelly A J, Crowley J M. 1995, Handbook of Electrostatic Processes. Marcel Dekker, Inc., New York

[1]	Doo-Hee CHANG, Seung Ho JEONG, Min PARK, Tae-Seong KIM, Bong-Ki JUNG, Kwang Won LEE, Sang Ryul IN. Discharge Characteristics of Large-Area High-Power RF Ion Source for Positive and Negative Neutral Beam Injectors[J]. Plasma Science and Technology, 2016, 18(12): 1220-1225. DOI: 10.1088/1009-0630/18/12/13
[2]	WEI Zian (卫子安), MA Jinxiu (马锦秀), LI Yuanrui (李元瑞), SUN Yan (孙彦), JIANG Zhengqi (江正琦). Control of Beam Energy and Flux Ratio in an Ion-Beam-Background Plasma System Produced in a Double Plasma Device[J]. Plasma Science and Technology, 2016, 18(11): 1076-1080. DOI: 10.1088/1009-0630/18/11/04
[3]	LIAN Youyun (练友运), LIU Xiang (刘翔), FENG Fan (封范), CHEN Lei (陈蕾), CHENG Zhengkui (程正奎), WANG Jin (王金), CHEN Jiming (谌继明). Manufacturing and High Heat Flux Testing of Brazed Flat-Type W/CuCrZr Plasma Facing Components[J]. Plasma Science and Technology, 2016, 18(2): 184-189. DOI: 10.1088/1009-0630/18/2/15
[4]	T. S. HAHM. Ion Heating from Nonlinear Landau Damping of High Mode Number Toroidal Alfvén Eigenmodes[J]. Plasma Science and Technology, 2015, 17(7): 534-538. DOI: 10.1088/1009-0630/17/7/02
[5]	WANG Qing(王庆), BA Dechun(巴德纯), MING Yue(明悦), XU Lin(徐林), GUO Deyu(郭德宇). Low Temperature Nitriding of 304 Austenitic Stainless Steel Using RF-ICP Method: the Role of Ion Beam Flux Density[J]. Plasma Science and Technology, 2014, 16(10): 960-963. DOI: 10.1088/1009-0630/16/10/10
[6]	XIE Yahong(谢亚红), HU Chundong(胡纯栋), LIU Sheng(刘胜), JIANG Caichao(蒋才超), LIANG Lizhen(梁立振), LI Jun(李军), XIE Yuanlai(谢远来), LIU Zhimin(刘智民). The Arc Regulation Characteristics of the High-Current Ion Source for the EAST Neutral Beam Injector[J]. Plasma Science and Technology, 2014, 16(4): 429-432. DOI: 10.1088/1009-0630/16/4/24
[7]	CHEN Lei(陈蕾), LIAN Youyun(练友运), LIU Xiang(刘翔). Behavior of Brazed W/Cu Mockup Under High Heat Flux Loads[J]. Plasma Science and Technology, 2014, 16(3): 278-282. DOI: 10.1088/1009-0630/16/3/19
[8]	WANG Fumin (王福敏), GAN Kaifu (甘开福), GONG Xianzu (龚先祖), EAST team. Temperature Distribution and Heat Flux on the EAST Divertor Targets in H-Mode[J]. Plasma Science and Technology, 2013, 15(3): 225-229. DOI: 10.1088/1009-0630/15/3/07
[9]	HU Chundong(胡纯栋), XIE Yahong(谢亚红), NBI team. The Development of a Megawatt-Level High Current Ion Source[J]. Plasma Science and Technology, 2012, 14(1): 75-77. DOI: 10.1088/1009-0630/14/1/16
[10]	ZHU Xueguang(朱学光). Influence of the Phase of the Antenna Current Standing Wave on the Power Flux in Ion Cyclotron Heating[J]. Plasma Science and Technology, 2010, 12(5): 543-546.