• 中文核心期刊要目总览
  • 中国科技核心期刊
  • 中国科学引文数据库(CSCD)
  • 中国科技论文与引文数据库(CSTPCD)
  • 中国学术期刊文摘数据库(CSAD)
  • 中国学术期刊(网络版)(CNKI)
  • 中文科技期刊数据库
  • 万方数据知识服务平台
  • 中国超星期刊域出版平台
  • 国家科技学术期刊开放平台
  • 荷兰文摘与引文数据库(SCOPUS)
  • 日本科学技术振兴机构数据库(JST)

Plasma-Assisted Chemical Vapor Deposition of Titanium Oxide Films by Dielectric Barrier Discharge in TiCl 4 /O 2 /N 2 Gas Mixtures

Plasma-Assisted Chemical Vapor Deposition of Titanium Oxide Films by Dielectric Barrier Discharge in TiCl 4 /O 2 /N 2 Gas Mixtures

  • 摘要: Low-pressure dielectric barrier discharge (DBD) TiCl 4 /O 2 and N 2 plasmas have been used to deposit titanium oxide films at different power supply driving frequencies. A home- made large area low pressure DBD reactor was applied, characterized by the simplicity of the experimental set-up and a low consumption of feed gas and electric power, as well as being easy to operate. Atomic force microscopy, scanning electron microscopy, energy dispersive spectroscopy, and contact angle measurements have been used to characterize the deposited films. Experimental results show all deposited films are uniform and hydrophilic with a contact angle of about 15 o . Compared to titanium oxide films deposited in TiCl 4 /O 2 gas mixtures, those in TiCl 4 /O 2 /N 2 gas mixtures are much more stable. The contact angle of titanium oxide films in TiCl 4 /O 2 /N 2 gas mixtures with the addition of 50% N 2 and 20% TiCl 4 is still smaller than 20 o, while that of undoped titanium oxide films is larger than 64 o when they are measured after one week. The low-pressure TiCl 4 /O 2 plasmas consist of pulsed glow-like discharges with peak widths of several microseconds, which leads to the uniform deposition of titanium oxide films. Increasing a film thickness over several hundreds of nm leads to the film’s fragmentation due to the over-high film stress. Optical emission spectra (OES) of TiCl 4 /O 2 DBD plasmas at various power supply driving frequencies are presented.

     

    Abstract: Low-pressure dielectric barrier discharge (DBD) TiCl 4 /O 2 and N 2 plasmas have been used to deposit titanium oxide films at different power supply driving frequencies. A home- made large area low pressure DBD reactor was applied, characterized by the simplicity of the experimental set-up and a low consumption of feed gas and electric power, as well as being easy to operate. Atomic force microscopy, scanning electron microscopy, energy dispersive spectroscopy, and contact angle measurements have been used to characterize the deposited films. Experimental results show all deposited films are uniform and hydrophilic with a contact angle of about 15 o . Compared to titanium oxide films deposited in TiCl 4 /O 2 gas mixtures, those in TiCl 4 /O 2 /N 2 gas mixtures are much more stable. The contact angle of titanium oxide films in TiCl 4 /O 2 /N 2 gas mixtures with the addition of 50% N 2 and 20% TiCl 4 is still smaller than 20 o, while that of undoped titanium oxide films is larger than 64 o when they are measured after one week. The low-pressure TiCl 4 /O 2 plasmas consist of pulsed glow-like discharges with peak widths of several microseconds, which leads to the uniform deposition of titanium oxide films. Increasing a film thickness over several hundreds of nm leads to the film’s fragmentation due to the over-high film stress. Optical emission spectra (OES) of TiCl 4 /O 2 DBD plasmas at various power supply driving frequencies are presented.

     

/

返回文章
返回