Advanced Search+
SHENG Zhicai (盛志才), XU Liuwei (许留伟), FU Peng (傅鹏). Design and Analysis of the Main AC/DC Converter System for ITER[J]. Plasma Science and Technology, 2012, 14(4): 338-342. DOI: 10.1088/1009-0630/14/4/13
Citation: SHENG Zhicai (盛志才), XU Liuwei (许留伟), FU Peng (傅鹏). Design and Analysis of the Main AC/DC Converter System for ITER[J]. Plasma Science and Technology, 2012, 14(4): 338-342. DOI: 10.1088/1009-0630/14/4/13

Design and Analysis of the Main AC/DC Converter System for ITER

More Information
  • Received Date: November 25, 2010
  • A design of the main AC/DC converter system for ITER is described and the configuration of the main AC/DC converters is presented. To reduce the reactive power absorbed from the converter units, the main AC/DC converters are designed to be series-connected and work in a sequential mode. The structure of the regulator of the converter system is described. A simulation model was built up for the PSCAD/EMTDC code, and the design was validated accordingly. Harmonic analysis and reactive power calculation of the converters units are presented. The results reveal the advantage of sequential control in reducing reactive power and harmonics.
  • Related Articles

    [1]Baoguo WANG (王保国), Dahuan ZHU (朱大焕), Rui DING (丁锐), Junling CHEN (陈俊凌). Thermal analysis on the EAST tungsten plasma facing components with shaping structure counteracting the misalignment issues[J]. Plasma Science and Technology, 2017, 19(2): 25603-025603. DOI: 10.1088/2058-6272/19/2/025603
    [2]WU Ding (吴鼎), LIU Ping (刘平), SUN Liying (孙立影), HAI Ran (海然), DING Hongbin (丁洪斌). Influence of a Static Magnetic Field on Laser Induced Tungsten Plasma in Air[J]. Plasma Science and Technology, 2016, 18(4): 364-369. DOI: 10.1088/1009-0630/18/4/06
    [3]PENG Shi (彭释), LI Lingjun (李灵均), LI Wei (李炜), WANG Chaoliang (王超梁), GUO Ying (郭颖), SHI Jianjun (石建军), ZHANG Jing (张菁). Surface Modification of Polyimide Film by Dielectric Barrier Discharge at Atmospheric Pressure[J]. Plasma Science and Technology, 2016, 18(4): 337-341. DOI: 10.1088/1009-0630/18/4/01
    [4]NIU Guojian(牛国鉴), LI Xiaochun(李小椿), DING Rui(丁锐), XU Qian(徐倩), LUO Guangnan(罗广南). Molecular Dynamics Simulations of Deposition and Damage on Tungsten Plasma-Facing Materials by Tungsten Dust[J]. Plasma Science and Technology, 2014, 16(8): 805-808. DOI: 10.1088/1009-0630/16/8/13
    [5]LI Maijuan(李麦娟), FU Yanbiao(符彦飙), SU Maogen(苏茂根), DONG Chenzhong(董晨钟), Koike FUMIHIRO. Dielectronic Recombination of Br-Like Tungsten Ions[J]. Plasma Science and Technology, 2014, 16(3): 182-187. DOI: 10.1088/1009-0630/16/3/02
    [6]YU Xingang (余新刚), GOU Fujun (苟富均). Molecular Dynamics Study on the Diffusion Properties of Hydrogen Atoms in Bulk Tungsten[J]. Plasma Science and Technology, 2013, 15(7): 710-715. DOI: 10.1088/1009-0630/15/7/19
    [7]ZHU Dahuan (朱大焕), LIU Yang (刘洋), CHEN Junling (陈俊凌), ZHOU Zhangjian (周张健), YAN Rong (鄢容). Surface Cracking Behaviors of Ultra-Fine Grained Tungsten Under Edge Plasma Loading in the HT-7 Tokamak[J]. Plasma Science and Technology, 2013, 15(6): 605-608. DOI: 10.1088/1009-0630/15/6/21
    [8]Miyuki YAJIMA, Masato YAMAGIWA, Shin KAJITA, Noriyasu OHNO, Masayuki TOKITANI, Arimichi TAKAYAM, Seiki SAITO, Atsushi M. ITO, Hiroaki NAKAMURA, Naoaki YOSHIDA. Comparison of Damages on Tungsten Surface Exposed to Noble Gas Plasmas[J]. Plasma Science and Technology, 2013, 15(3): 282-286. DOI: 10.1088/1009-0630/15/3/18
    [9]Takanori MIYAMOTO, Shuichi TAKAMURA, Hiroaki KURISHITA. Recovery of Tungsten Surface with Fiber-Form Nanostructure by Plasmas Exposures[J]. Plasma Science and Technology, 2013, 15(2): 161-165. DOI: 10.1088/1009-0630/15/2/17
    [10]LIU bo (刘波), YANG JiJun (杨吉军), JIAO Guohua (焦国华), XU KeWei (徐可为). Improvement of Interfacial Adhesion Strength and Thermal Stability of Cu/p-SiC:H/SiOC:H Film Stack by Plasma Treatment on the Surface of Cu Film[J]. Plasma Science and Technology, 2012, 14(7): 619-623. DOI: 10.1088/1009-0630/14/7/12

Catalog

    Article views (598) PDF downloads (1549) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return