Recent progress on non-thermal plasma technology for high barrier layer fabrication

Haibao ZHANG (张海宝); Lijun SANG (桑利军); Zhengduo WANG (王正铎); Zhongwei LIU (刘忠伟); Lizhen YANG (杨丽珍); Qiang CHEN (陈强)

doi:10.1088/2058-6272/aaacc8

Plasma Science and Technology > 2018 > 20(6): 63001-063001. > DOI: 10.1088/2058-6272/aaacc8

Haibao ZHANG (张海宝), Lijun SANG (桑利军), Zhengduo WANG (王正铎), Zhongwei LIU (刘忠伟), Lizhen YANG (杨丽珍), Qiang CHEN (陈强). Recent progress on non-thermal plasma technology for high barrier layer fabrication[J]. Plasma Science and Technology, 2018, 20(6): 63001-063001. DOI: 10.1088/2058-6272/aaacc8

Citation:

PDF (855 KB)

Recent progress on non-thermal plasma technology for high barrier layer fabrication

Laboratory of Plasma Physics and Materials, Beijing Institute of Graphic Communication, Beijing 102600, People’s Republic of China

Funds: This study is financially supported by National Natural Science Foundation of China (Nos. 11505013, 11775028), Beijing Municipal Excellent Talent Training Foundation (No. 2016000026833ZK12), Science and Technology Innovational Serviceability Building Project of Beijing Municipal Education Commission (No. PXM2017_014223_000066), Excellent Talent Selection and Training Project of BIGC of China (No. 04190117004/026), Institute level project of BIGC of China (No. Eb201502).

More Information

Received Date: November 20, 2017

Graphical Abstract

Abstract

Abstract

This review describes the application of non-thermal plasma (NTP) technology for high barrier layer fabrication in packaging area. NTP technology is considered to be the most prospective approaches for the barrier layer fabrication over the past decades due to unpollution, high speed, low-costing. The applications of NTP technology have achieved numerous exciting results in high barrier packaging area. Now it seemly demands a detailed review to summarize the past works and direct the future developments. This review focuses on the different NTP resources applied in the high barrier area, the role of plasma surface modification on packaging film surface properties, and the deposition of different barrier coatings based on NTP technology. In particular, this review emphasizes the cutting-edge technologies of NTP on interlayer deposition with organic, inorganic for multilayer barriers fabrication. The future prospects of NTP technology in high barrier film areas are also described.
- non-thermal plasma (NTP),
- polymer, permeability,
- barrier layer,
- surface modification

FullText(HTML)

References (263)

References

[1]	Jarvis K L and Evans P J 2017 Thin Solid Films 624 111
[2]	Prager L et al 2014 Thin Solid Films 570 87
[3]	Fahlteich J et al 2009 Thin Solid Films 517 3075
[4]	Siracusa V 2012 Int. J. Polym. Sci. 2012 1
[5]	Tseng I H et al 2012 Mater. Chem. Phys. 136 247
[6]	Zhu P et al 2005 Thin Solid Films 473 351
[7]	Langowskia H-C 2012 J. Adhes. Sci. Technol. 25 223
[8]	Scopece P et al 2009 Plasma Process. Polym. 6 S705
[9]	Premkumar P A et al 2013 Plasma Process. Polym. 10 313
[10]	Thomas M et al 2012 Plasma Process. Polym. 9 1086
[11]	Barreto M C et al 2012 Plasma Process. Polym. 9 1208
[12]	Khelifa F et al 2016 Chem. Rev. 116 3975
[13]	Vartiainen J, V?h?-Nissi M and Harlin A 2014 Mater. Sci. Appl. 5 708
[14]	Morent R et al 2011 Plasma Process. Polym. 8 171
[15]	Pankaj S K et al 2014 Trends Food Sci. Technol. 35 5
[16]	Shao T et al 2010 Appl. Surf. Sci. 256 3888
[17]	Fanelli F 2010 Surf. Coat. Technol. 205 1536
[18]	Roth J R et al 2005 J. Phys. D: Appl. Phys. 38 555
[19]	LeiM K,LiuYandLiYP2011 Appl. Surf. Sci. 257 7350
[20]	Napartovich A P 2001 Plasmas Polym. 6 1
[21]	Yu D et al 2016 Opt. Commun. 362 43
[22]	Chen T N et al 2006 J. Electrochem. Soc. 153 F244
[23]	George S C and Thomas S 2001 Prog. Polym. Sci. 26 982
[24]	Lagaron J M, Catalá R and Gavara R 2013 Mater. Sci. Technol. 20 1
[25]	Dury-Brun C et al 2007 Food Rev. Int. 23 199
[26]	Marrink S J and Berendsen H J C 1996 J. Phys. Chem. 100 16729
[27]	Caner C et al 2003 J. Sci. Food Agric. 83 1095
[28]	Juliano P et al 2012 Food Eng. Rev. 4 55
[29]	Koutchma T et al 2010 J. Food Process Eng. 33 1097
[30]	Chatham H 1996 Surf. Coat. Technol. 78 1
[31]	V?h?-Nissi M et al 2012 Thin Solid Films 520 6780
[32]	Charifou R et al 2016 J. Membr. Sci. 500 245
[33]	Tonks L and Langmuir I 1929 Phys. Rev. 34 876
[34]	Braithwaite N S J 2000 Plasma Sources Sci. Technol. 9 517
[35]	Mista W and Kacprzyk R 2008 Catal. Today 137 345
[36]	Bazinette R et al 2016 Plasma Process. Polym. 13 1015
[37]	Ozkaya B et al 2015 Plasma Process. Polym. 12 392
[38]	Chua P K et al 2002 Mater. Sci. Eng. R 36 143
[39]	Zhang H, Cao T and Cheng Y 2014 Green Process. Synth. 3 315
[40]	Zhang H, Cao T and Cheng Y 2015 Carbon 86 38
[41]	Zhang H et al 2013 CrystEngComm 15 1432
[42]	LeeH W et al 2009 J. Endodontics 35 587
[43]	Desmet T et al 2009 Biomacromolecules 10 2351
[44]	Li Y P et al 2012 Surf. Coat. Technol. 206 4952
[45]	Tajima S and Komvopoulos K 2005 J. Phys. Chem. B 109 17623
[46]	Blades M W 1994 Spectrochim. Acta B 49 47
[47]	Bora B et al 2012 Phys. Lett. A 376 1356
[48]	Bora B et al 2011 Phys. Plasmas 18 103509
[49]	Piejak R B, Godyak V A and Alexandrovich B M 1992 Plasma Sources Sci. Technol. 1 179
[50]	Kogelschatz U 2002 Plasma Chem. Plasma Process. 23 1
[51]	Wang C et al 2012 Plasma Sci. Technol. 14 891
[52]	Massines F et al 2001 Plasmas Polym. 6 35
[53]	Kostov K G et al 2012 J. Appl. Polym. Sci. 125 4121
[54]	Hu W et al 2009 Chin. Phys. B 18 1276
[55]	Massines F et al 2012 Plasma Process. Polym. 9 1041
[56]	Kim H-H 2004 Plasma Process. Polym. 1 91
[57]	Fridman A, Chirokov A and Gutsol A 2005 J. Phys. D: Appl. Phys. 38 R1
[58]	Kogelschatz U, Eliasson B and Egli W 1997 J. Physique IV 07 C4-47–66
[59]	Foest R, Schmidt M and Becker K 2006 Int. J. Mass Spectrom. 248 87
[60]	Liston E M, Martinu L and Wertheimer M R 1993 J. Adhes. Sci. Technol. 7 1091
[61]	Shenton M, Lovell-Hoare M and Stevens G C 2001 J. Phys. D: Appl. Phys. 34 2754
[62]	Itoh H et al 2013 Japan. J. Appl. Phys. 52 11NE01
[63]	Samukawa S and Furuoya S 1993 Appl. Phys. Lett. 63 2044
[64]	Anton R et al 2000 Rev. Sci. Instrum. 71 1177
[65]	Guruvenket S et al 2004 Appl. Surf. Sci. 236 278
[66]	Guruvenket S et al 2003 J. Appl. Polym. Sci. 90 1618
[67]	Conrads H and Schmidt M 2000 Plasma Sources Sci. Technol. 9 441
[68]	Takagi S et al 2013 Japan. J. Appl. Phys. 52 086502
[69]	Kim J et al 2011 Appl. Phys. Lett. 98 091502
[70]	Grüniger A et al 2006 Surf. Coat. Technol. 200 4564
[71]	K?rner L, Sonnenfeld A and von Rohr P R 2010 Thin Solid Films 518 4840
[72]	Coclite A M et al 2010 Surf. Coat. Technol. 204 4012
[73]	Howells D G et al 2008 Thin Solid Films 516 3081
[74]	Bieder A, Gruniger A and Rohr P R 2005 Surf. Coat. Technol. 200 928
[75]	Trunec D et al 2010 J. Phys. D: Appl. Phys. 43 225403
[76]	Schmidt-Szalowski K et al 2000 Plasmas Polym. 5 173
[77]	Meng X et al 2017 Mater. Horiz. 4 133
[78]	Lu J, Elam J W and Stair P C 2016 Surf. Sci. Rep. 71 410
[79]	Guo Z et al 2016 Surf. Coat. Technol. 307 1059
[80]	Guo Z et al 2015 Chem. Mater. 27 5988
[81]	Mourey D A et al 2010 IEEE Trans. Electron Devices 57 530
[82]	Akishev Y et al 2001 J. Phys. D: Appl. Phys. 34 2875
[83]	Moon S Y, Choe W and Kang B K 2004 Appl. Phys. Lett. 84 188
[84]	Moon S Y et al 2002 Phys. Plasmas 9 4045
[85]	Massines F et al 2005 Plasma Phys. Control. Fusion 47 B577
[86]	Bichler C et al 1999 Surf. Coat. Technol. 112 373
[87]	Zhang H B et al 2016 Appl. Surf. Sci. 388 539
[88]	Patra N et al 2013 Polym. Degrad. Stab. 98 1489
[89]	López-García J et al 2013 Vacuum 95 43
[90]	Schaepkens M et al 2004 J. Vac. Sci. Technol. A 22 1716
[91]	Czeremuszkin G et al 2001 Plasmas Polym. 6 107
[92]	Hansen R H and Schonhorn H 1966 J. Polym. Sci. C 4 203
[93]	Hall J R et al 1969 J. Appl. Polym. Sci. 13 2085
[94]	Hollahan J R et al 1969 J. Appl. Polym. Sci. 13 807
[95]	Schonhorn H and Hansen R H 1969 J. Appl. Polym. Sci. 11 1461
[96]	Gomathi N and Neogi S 2009 Appl. Surf. Sci. 255 7590
[97]	Ataeefard M et al 2009 Progress Org. Coat. 64 482
[98]	Egitto F D and Matienzo L J 1990 Polym. Degrad. Stab. 30 293
[99]	Zheng S et al 2003 J. Adhes. Sci. Technol. 17 1801
[100]	Bhat N V and Upadhyay D J 2002 J. Appl. Polym. Sci. 86 925
[101]	Deshmukh R R and Bhat N V 2003 Mater. Res. Innov. 7 283
[102]	Coulon J F, Tournerie N and Maillard H 2013 Appl. Surf. Sci. 283 843
[103]	Wan Y et al 2004 Biomaterials 25 4777
[104]	Novák I et al 2007 Polym. Adv. Technol. 18 97
[105]	Cui N-Y et al 2007 Appl. Surf. Sci. 253 3865
[106]	?teyaka M ? et al 2011 Plasma Chem. Plasma Process. 32 17
[107]	Aouinti M, Bertrand P and Poncin-Epaillard F 2003 Plasmas Polym. 8 225
[108]	Almazan-Almazan M C et al 2005 J. Colloid Interface Sci. 287 57
[109]	Wang R et al 2015 Appl. Surf. Sci. 328 509
[110]	Zhang C et al 2014 Appl. Surf. Sci. 311 468
[111]	Shao T et al 2014 Appl. Phys. Lett. 105 071607
[112]	Fanelli F, Fracassi F and d’Agostino R 2007 Plasma Process. Polym. 4 S430
[113]	Ma W-C, Lin C-H and Huang C 2015 Plasma Process. Polym. 12 362
[114]	Bryjak M et al 2002 Eur. Polym. J. 38 717
[115]	Mirabedini S M et al 2007 Progress Org. Coat. 60 105
[116]	Gupta B et al 2002 Biomaterials 23 863
[117]	Turmanova S et al 2008 J. Polym. Res. 15 309
[118]	Navaneetha Pandiyaraj K et al 2008 Vacuum 83 332
[119]	Pandiyaraj K N et al 2009 Appl. Surf. Sci. 255 3965
[120]	Pal D, Neogi S and De S 2015 Thin Solid Films 597 171
[121]	Tkavc T et al 2014 Int. J. Adhes. Adhes. 48 168
[122]	HanD C et al 2010 Mol. Cryst. Liq. Cryst. 532 148
[123]	Fang Z et al 2012 Vacuum 86 1305
[124]	Upadhyay D J et al 2004 Appl. Surf. Sci. 229 352
[125]	Morsy F A et al 2006 Surf. Coat. Int. B 89 1
[126]	Zhang C et al 2010 IEEE Trans. Plasma Sci. 38 1517
[127]	Kaminska A, Kaczmarek H and Kowalonek J 2002 Eur. Polym. J. 38 1915
[128]	Bhattacharya A 2004 Prog. Polym. Sci. 29 767
[129]	Deng J et al 2009 Prog. Polym. Sci. 34 156
[130]	Matyjaszewski K et al 2007 Langmuir 23 4528
[131]	Choi K-m et al 2013 Eur. Polym. J. 49 2356
[132]	Phllippou J L 2007 J. Wood Chem. Technol. 1 199
[133]	Dargaville T R et al 2003 Prog. Polym. Sci. 28 1355
[134]	Estrada-Villegas G M and Bucio E 2013 Radiat. Phys. Chem. 92 61
[135]	López-Saucedo F et al 2017 Radiat. Phys. Chem. 132 1
[136]	Walo M et al 2015 Eur. Polym. J. 68 398
[137]	Zhou T et al 2016 Prog. Mater. Sci. 83 191
[138]	Gu M, Kilduff J E and Belfort G 2012 Biomaterials 33 1261
[139]	Tatoulian M, Are?-Khonsari F and Borra J-P 2007 Plasma Process. Polym. 4 360
[140]	Hartman J, Albertsson A-C and Sjoberg J 2006 Biomacromolecules 7 1983
[141]	Edmondson S, Osborne V L and Huck W T 2004 Chem. Soc. Rev. 33 14
[142]	Barbey R et al 2009 Chem. Rev. 109 5437
[143]	Olivier A et al 2012 Prog. Polym. Sci. 37 157
[144]	Brittain W J and Minko S 2007 J. Polym. Sci. A 45 3505
[145]	Sheridan R J et al 2016 Langmuir 32 8071
[146]	Navaneetha Pandiyaraj K et al 2016 Appl. Surf. Sci. 370 545
[147]	Wang C and Chen J-R 2007 Appl. Surf. Sci. 253 4599
[148]	Wang C, Chen J-R and Li R 2008 Appl. Surf. Sci. 254 2882
[149]	Li R and Chen J-R 2006 Appl. Surf. Sci. 252 5076
[150]	Vasilets V N et al 1997 Biomaterials 18 1139
[151]	Wu T, E?menko K and Genzer J 2002 J. Am. Chem. Soc. 124 9394
[152]	Xue Y-H et al 2017 Macromolecules 50 6482
[153]	Kuzuya M et al 2003 Surf. Coat. Technol. 169-170 587
[154]	Kuzuya M et al 2001 J. Photopolym. Sci. Technol. 14 87
[155]	Kuzuya M et al 1997 Plasmas Polym. 2 113
[156]	Sasai Y et al 2007 J. Photopolym. Sci. Technol. 20 197
[157]	Sasai Y et al 2006 J. Photopolym. Sci. Technol. 19 265
[158]	d’Agostino R et al 2005 Plasma Process. Polym. 2 7
[159]	Biederman H 1987 Vacuum 37 367
[160]	Goodman J 1960 J. Polym. Sci. A 44 551
[161]	Goodman I and Nesbitt B F 1960 Polymer 1 384
[162]	Ligot S et al 2015 Plasma Process. Polym. 12 1200
[163]	Ligot S et al 2015 Plasma Process. Polym. 12 508
[164]	Mathai C J et al 2002 J. Phys. D: Appl. Phys. 35 240
[165]	Tang W et al 2008 Plasma Sci. Technol. 10 176
[166]	Pandiyaraj K N et al 2015 Appl. Surf. Sci. 328 1
[167]	Friedrich J 2011 Plasma Process. Polym. 8 783
[168]	Trieschmann J and Hegemann D 2011 J. Phys. D: Appl. Phys. 44 475201
[169]	Ligot S et al 2013 Plasma Process. Polym. 10 999
[170]	Dayss E, Leps G and Meinhardt J 1999 Surf. Coat. Technol. 116–119 986
[171]	Zhao G, Chen Y and Wang X 2007 Appl. Surf. Sci. 253 4709
[172]	Gancarz I et al 2002 Eur. Polym. J. 38 1937
[173]	Bélard L et al 2013 Eur. Polym. J. 49 882
[174]	Le D? G et al 2007 Surf. Coat. Technol. 201 5815
[175]	Zhang M C et al 2001 Colloids Surf. A 176 139
[176]	Petersen J et al 2011 Plasma Process. Polym. 8 895
[177]	Petersen J et al 2012 ACS Appl. Mater. Interfaces 4 1072
[178]	Becker C et al 2011 J. Phys. Chem. C 115 10675
[179]	Kurdi J et al 2002 Appl. Surf. Sci. 189 119
[180]	Sandrin L and Sacher E 1998 Appl. Surf. Sci. 135 339
[181]	Moosheimer U and Bichler C 1999 Surf. Coat. Technol. 116–119 812
[182]	Garrido-López á and Tena M T 2010 Appl. Surf. Sci. 256 3799
[183]	Tseng W J and Chang J-H 2014 Ceram. Int. 40 16779
[184]	Szymanski S F, Seman M T and Wolden C A 2007 Surf. Coat. Technol. 201 8991
[185]	Carcia P F et al 2006 Appl. Phys. Lett. 89 031915
[186]	Dameron A A et al 2008 J. Phys. Chem. C 112 4573
[187]	Wang H, Yang L and Chen Q 2014 Plasma Sci. Technol. 16 37
[188]	Schneider J et al 2007 Plasma Process. Polym. 4 S155
[189]	Schneider J et al 2009 Plasma Process. Polym. 6 S700
[190]	Majee S et al 2015 Thin Solid Films 575 72
[191]	ChenT N et al 2006 Thin Solid Films 514 188
[192]	Lin H et al 1998 Thin Solid Films 333 71
[193]	Yonekura D, Fujikawa K and Murakami R-I 2010 Surf. Coat. Technol. 205 168
[194]	Lin M C, Chang L S and Lin H C 2008 Appl. Surf. Sci. 254 3509
[195]	Bewilogua K and Hofmann D 2014 Surf. Coat. Technol. 242 214
[196]	Ogino A and Nagatsu M 2007 Thin Solid Films 515 3597
[197]	Kodama H et al 2006 Surf. Coat. Technol. 201 913
[198]	Kakiuchi H et al 2012 Plasma Chem. Plasma Process. 32 533
[199]	Ozeki K et al 2009 Appl. Surf. Sci. 255 7286
[200]	Zhang G M et al 2011 Appl. Mech. Mater. 80–81 104
[201]	Abbas G A et al 2005 Carbon 43 303
[202]	Polonskyi O et al 2013 Thin Solid Films 540 65
[203]	Walther M, Heming M and Spallek M 1996 Surf. Coat. Technol. 80 200
[204]	Bieder A, Gruniger A and von Rohr R 2005 Surf. Coat. Technol. 200 928
[205]	Hegemann D, Brunner H and Oehr C 2003 Nucl. Inst. Methods Phys. Res. B 208 281
[206]	Hegemann D, Brunner H and Oehr C 2001 Surf. Coat. Technol. 142–144 849
[207]	Hegemann D, Brunner H and Oehr C 2003 Surf. Coat. Technol. 174–175 253
[208]	Hegemann D, Brunner H and Oehr C 2001 Plasmas Polym. 6 221
[209]	Starostin S A et al 2015 Plasma Process. Polym. 12 545
[210]	Struller C F, Kelly P J and Copeland N J 2014 Surf. Coat. Technol. 241 130
[211]	Struller C F et al 2014 Thin Solid Films 553 153
[212]	Struller C F et al 2012 J. Vac. Sci. Technol. A 30 041502
[213]	Ludwig R, Kukla R and Josephson E 2005 Proc. IEEE 93 1483
[214]	Audronis M et al 2011 Thin Solid Films 520 1564
[215]	Leskela M and Ritala M 2002 Thin Solid Films 409 138
[216]	George S M 2010 Chem. Rev. 110 111
[217]	FangG Y et al 2015 Chem. Commun. 51 1341
[218]	Fang G et al 2016 Chem. Mater. 28 1247
[219]	Lee J G, Kim H G and Kim S S 2013 Thin Solid Films 534 515
[220]	Li X et al 2011 Phys. Proc. 18 100
[221]	Langereis E et al 2006 Appl. Phys. Lett. 89 081915
[222]	Kim L H et al 2014 ACS Appl. Mater. Interfaces 6 6731
[223]	Groner M D et al 2006 Appl. Phys. Lett. 88 051907
[224]	Lewis J 2006 Mater. Today 9 38
[225]	Graff G L, Williford R E and Burrows P E 2004 J. Appl. Phys. 96 1840
[226]	Majee S et al 2015 Progress Org. Coat. 80 27
[227]	Tashiro H, Nakaya M and Hotta A 2013 Diam. Relat. Mater. 35 7
[228]	Hwang K-H et al 2014 Korean J. Chem. Eng. 31 528
[229]	Seo S-W et al 2014 Thin Solid Films 550 742
[230]	Lim S H et al 2016 Korean J. Chem. Eng. 33 1971
[231]	Bülow T et al 2014 Nanoscale Res. Lett. 9 1
[232]	Patelli A et al 2009 Plasma Process. Polym. 6 S665
[233]	Wu C-Y et al 2012 Surf. Coat. Technol. 206 4685
[234]	Hong S-I and Krochta J M 2003 J. Food Sci. 68 224
[235]	Schmid M et al 2012 Int. J. Polym. Sci. 2012 562381
[236]	Tihminlioglu F, Atik ? D and ?zen B 2010 J. Food Eng. 96 342
[237]	Berlinet C, Brat P and Ducruet V 2008 Packag. Technol. Sci. 21 279
[238]	Dombre C et al 2014 J. Membr. Sci. 463 215
[239]	Giovanelli G and Brenna O V 2006 Eur. Food Res. Technol. 226 169
[240]	Sacchi R et al 2008 Packag. Technol. Sci. 21 269
[241]	Steves S et al 2013 J. Phys. D: Appl. Phys. 46 084013
[242]	Nakaya M, Uedono A and Hotta A 2015 Coatings 5 987
[243]	S?ngerlaub S and Müller K 2017 Packag. Technol. Sci. 30 45
[244]	Robertson J 2011 Japan. J. Appl. Phys. 50 01AF01
[245]	Silva F et al 2007 Diam. Relat. Mater. 16 1278
[246]	Ikeyama M et al 2007 Nucl. Instrum. Methods Phys. Res. B 257 741
[247]	Li Y et al 2009 Chin. Phys. B 18 5401
[248]	Deilmann M, Thei? S and Awakowicz P 2008 Surf. Coat. Technol. 202 1911
[249]	Deilmann M et al 2009 Plasma Process. Polym. 6 S695
[250]	Deilmann M et al 2008 J. Food Prot. 71 2119
[251]	Boutroy N et al 2006 Diam. Relat. Mater. 15 921
[252]	Burrows P E et al 2001 Proc. SPIE 4105 75
[253]	Carcia P F et al 2009 J. Appl. Phys. 106 023533
[254]	Charton C et al 2006 Thin Solid Films 502 99
[255]	Kim N et al 2012 Sol. Energy Mater. Sol. Cells 101 140
[256]	Klumbies H et al 2014 Sol. Energy Mater. Sol. Cells 120 685
[257]	Paetzold R et al 2003 Rev. Sci. Instrum. 74 5147
[258]	Yang J et al 2015 TRAC Trends Anal. Chem. 72 10
[259]	Tümay ?zer E and Gü?er ? 2012 Polym. Test. 31 474
[260]	Mezcua M et al 2012 Talanta 100 90
[261]	Fei F et al 2013 Surf. Coat. Technol. 228 S61
[262]	Fei F et al 2012 Plasma Chem. Plasma Process. 32 755
[263]	Welle F and Franz R 2008 Food Additives Contaminants A 25 788

[1]	Haiying WEI (魏海英), Hongge GUO (郭红革), Meili ZHOU (周美丽), Lei YUE (岳蕾), Qiang CHEN (陈强). DBD plasma assisted atomic layer deposition alumina barrier layer on self-degradation polylactic acid film surface[J]. Plasma Science and Technology, 2019, 21(1): 15503-015503. DOI: 10.1088/2058-6272/aae0ee
[2]	Mooktzeng LIM (林木森), Ahmad Zulazlan Shah ZULKIFLI. Investigation of biomass surface modification using non-thermal plasma treatment[J]. Plasma Science and Technology, 2018, 20(11): 115502. DOI: 10.1088/2058-6272/aac819
[3]	PENG Shi (彭释), LI Lingjun (李灵均), LI Wei (李炜), WANG Chaoliang (王超梁), GUO Ying (郭颖), SHI Jianjun (石建军), ZHANG Jing (张菁). Surface Modification of Polyimide Film by Dielectric Barrier Discharge at Atmospheric Pressure[J]. Plasma Science and Technology, 2016, 18(4): 337-341. DOI: 10.1088/1009-0630/18/4/01
[4]	LIU Wenzheng (刘文正), LEI Xiao (雷晓), ZHAO Qiang (赵强). Study on Glow Discharge Plasma Used in Polyester Surface Modification[J]. Plasma Science and Technology, 2016, 18(1): 35-40. DOI: 10.1088/1009-0630/18/1/07
[5]	CHE Yao (车垚), ZHOU Jiayong (周家勇), WANG Zuwu (王祖武). Plasma Modification of Activated Carbon Fibers for Adsorption of SO ₂[J]. Plasma Science and Technology, 2013, 15(10): 1047-1052. DOI: 10.1088/1009-0630/15/10/16
[6]	YAN Ying (燕颖), CAI Kaiyong (蔡开勇), YANG Weihu (杨维虎), LIU Peng (刘鹏). Surface Modification of NiTi Alloy via Cathodic Plasma Electrolytic Deposition and its Effect on Ni Ion Release and Osteoblast Behaviors[J]. Plasma Science and Technology, 2013, 15(7): 648-653. DOI: 10.1088/1009-0630/15/7/09
[7]	LIU Hongxia (刘红霞), LIU Yun (刘云). Investigation on the Effects and Mechanisms of PTFE Surface Modification by Low Pressure Plasma?[J]. Plasma Science and Technology, 2012, 14(8): 728-734. DOI: 10.1088/1009-0630/14/8/09
[8]	ZHAO Guowei, GAO Junping, GAO Qiang, CHEN Yashao. Surface Modification of Biodegradable Poly(D,L-lactic acid) by Nitrogen and Nitrogen/Hydrogen Plasma for Improving Surface Hydrophilicity[J]. Plasma Science and Technology, 2011, 13(2): 230-234.
[9]	YE Wenting(叶文婷), WU Di(吴迪), PAN Xin(潘欣), CHEN Yashao(陈亚芍), HAN Yong(憨勇), SONG Zhongxiao(宋忠孝). Preparation of Chitosan Coatings Containing Calcium and Phosphorus on Titanium Surface by the Cathode Liquid Phase Plasma Technology[J]. Plasma Science and Technology, 2010, 12(5): 614-618.
[10]	Xu Jinzhou(徐金洲), Zhong Ping(钟平), Li Jialing(李嘉灵), Ling Jie (林捷), Diao Ying(刁颖), Zhang Jing(张菁). Characteristics of Coaxial Dielectric Barrier Discharge at an Atmospheric Pressure with a Swirling Gas Argon/Oxygen Mixture for the Surface Modification of Polyester Fiber Cord[J]. Plasma Science and Technology, 2010, 12(5): 601-607.