Citation: | Ling LI (李玲), Hailin GUO (郭海林), Junqin ZONG (宗俊勤), Jingbo CHEN (陈静波), Yi WANG (汪毅), Jianjian LI (李建建), Dandan LI (李丹丹), Hanliang SHAO (邵汉良), Jianxiu LIU (刘建秀). Influence of low-vacuum helium cold plasma pre-treatment on the rooting and root growth of zoysiagrass (Zoysia Willd.) stolon cuttings[J]. Plasma Science and Technology, 2019, 21(5): 55504-055504. DOI: 10.1088/2058-6272/aaf368 |
[1] |
Misra N N et al 2016 Trends Food Sci. Technol. 55 39
|
[2] |
Bourke P et al 2018 Trends Biotechnol. 36 615
|
[3] |
Kl?mpfl T G et al 2012 Appl. Environ. Microbiol. 78 5077
|
[4] |
Zahoranová A et al 2016 Plasma Chem. Plasma Process. 36 397
|
[5] |
Kitazaki S et al 2012 Japan. J. Appl. Phys. 51 01AE01
|
[6] |
?erá B et al 2008 Plasma Sci. Technol. 10 506
|
[7] |
Bormashenko E et al 2015 J. Exp. Bot. 66 4013
|
[8] |
Meng Y R et al 2017 Plasma Chem. Plasma Process. 37 1105
|
[9] |
Li L et al 2014 Sci. Rep. 4 5859
|
[10] |
Jiang J F et al 2014 PLoS One 9 e97753
|
[11] |
Li L et al 2016 Plasma Sci. Technol. 18 1027
|
[12] |
Zhou Z W et al 2011 Agric. Sci. 2 23
|
[13] |
Jiang J F, Li J G and Dong Y H 2018 Plasma Sci. Technol. 20 044007
|
[14] |
Thompson G L and Kao-Kniffin J 2017 Crop Sci. 57 S-238
|
[15] |
Chai M L et al 2011 Plant Cell Tissue Organ Cult. 104 187
|
[16] |
Richardson M D, Boyd J W and McCalla J H 2003 HortTechnology 13 74
|
[17] |
Patton A J, Volenec J J and Reicher Z J 2007 Crop Sci. 47 1237
|
[18] |
Ahkami A H et al 2009 New Phytol. 181 613
|
[19] |
Druege U, Franken P and Hajirezaei M R 2016 Front. Plant Sci. 7 381
|
[20] |
Steffens B and Rasmussen A 2016 Plant Physiol. 170 603
|
[21] |
Agulló-Antón M á et al 2014 Physiol. Plant. 150 446
|
[22] |
Porfírio S et al 2016 Sci. Hortic. 198 207
|
[23] |
Chen J B et al 2014 J. Hortic. Sci. Biotechnol. 89 35
|
[24] |
Turk M A and Tawaha A M 2003 Crop Prot. 22 673
|
[25] |
Lebude A V et al 2004 Tree Physiol. 24 823
|
[26] |
Puri S and Thompson F B 2003 Agroforest. Syst. 58 1
|
[27] |
Peer K R and Greenwood M S 2001 Tree Physiol. 21 267
|
[28] |
Bellini C, Pacurar D I and Perrone I 2014 Annu. Rev. Plant Biol. 65 639
|
[29] |
Erstad J L F and Gisler?d H R 1994 Sci. Hortic. 58 151
|
[30] |
Park Y et al 2018 Plasma Process. Polym. 15 e1600056
|
[1] | Dian ZHANG (张点), Jun ZHANG (张军), Song LI (李嵩), Jing LIU (刘静), Huihuang ZHONG (钟辉煌). Design and preliminary experiment of radial sheet beam terahertz source based on radial pseudospark discharge[J]. Plasma Science and Technology, 2019, 21(4): 44003-044003. DOI: 10.1088/2058-6272/aafbc3 |
[2] | Rongxiao ZHAI (翟戎骁), Tao HUANG (黄涛), Peitian CONG (丛培天), Weixi LUO (罗维熙), Zhiguo WANG (王志国), Tianyang ZHANG (张天洋), Jiahui YIN (尹佳辉). Comparative study on breakdown characteristics of trigger gap and overvoltage gap in a gas pressurized closing switch[J]. Plasma Science and Technology, 2019, 21(1): 15505-015505. DOI: 10.1088/2058-6272/aae432 |
[3] | Rongxiao ZHAI (翟戎骁), Mengtong QIU (邱孟通), Weixi LUO (罗维熙), Peitian CONG (丛培天), Tao HUANG (黄涛), Jiahui YIN (尹佳辉), Tianyang ZHANG (张天洋). Experimental investigation on the development characteristics of initial electrons in a gas pressurized closing switch under DC voltage[J]. Plasma Science and Technology, 2018, 20(4): 45505-045505. DOI: 10.1088/2058-6272/aaa8d8 |
[4] | Pengfei ZHANG (张鹏飞), Yang HU (胡杨), Jiang SUN (孙江), Yan SONG (宋岩), Jianfeng SUN (孙剑锋), Zhiming YAO (姚志明), Peitian CONG (丛培天), Mengtong QIU (邱孟通), Aici QIU (邱爱慈). Design and experimental research on a selfmagnetic pinch diode under MV[J]. Plasma Science and Technology, 2018, 20(1): 14014-014014. DOI: 10.1088/2058-6272/aa8592 |
[5] | Yuantao ZHANG (张远涛), Yu LIU (刘雨), Bing LIU (刘冰). On peak current in atmospheric pulse-modulated microwave discharges by the PIC-MCC model[J]. Plasma Science and Technology, 2017, 19(8): 85402-085402. DOI: 10.1088/2058-6272/aa6a51 |
[6] | JU Xingbao (琚兴宝), SUN Haishun (孙海顺), YANG Zhuo (杨倬), ZHANG Junmin (张俊民). Investigation on the Arc Ignition Characteristics and Energy Absorption of Liquid Metal Current Limiter Based on Self-Pinch Effect[J]. Plasma Science and Technology, 2016, 18(5): 531-537. DOI: 10.1088/1009-0630/18/5/15 |
[7] | HU Yixiang(呼义翔), ZENG Jiangtao(曾江涛), SUN Fengju(孙凤举), WEI Hao(魏浩), YIN Jiahui(尹佳辉), CONG Peitian(丛培天), QIU Aici(邱爱慈). Modeling Methods for the Main Switch of High Pulsed-Power Facilities Based on Transmission Line Code[J]. Plasma Science and Technology, 2014, 16(9): 873-876. DOI: 10.1088/1009-0630/16/9/12 |
[8] | DING Siye(丁斯晔), WAN Baonian(万宝年), WANG Lu(王璐), TI Ang(提昂), ZHANG Xinjun(张新军), LIU Zixi(刘子奚), QIAN Jinping(钱金平), ZHONG Guoqiang(钟国强), DUAN Yanmin(段艳敏). Observation of Electron Energy Pinch in HT-7 ICRF Heated Plasmas[J]. Plasma Science and Technology, 2014, 16(9): 826-832. DOI: 10.1088/1009-0630/16/9/04 |
[9] | YAO Xueling(姚学玲), CHEN Jingliang(陈景亮), HU Shangmao(胡上茂). Emission Current Characteristics of Triggered Device of Vacuum Switch[J]. Plasma Science and Technology, 2014, 16(4): 380-384. DOI: 10.1088/1009-0630/16/4/14 |
[10] | SUN Jiang (孙江), SUN Jianfeng (孙剑锋), YANG Hailiang (杨海亮), ZHANG Pengfei (张鹏飞), et al.. Plasma Density Influence on the Properties of a Plasma Filled Rod Pinch Diode[J]. Plasma Science and Technology, 2013, 15(9): 904-907. DOI: 10.1088/1009-0630/15/9/14 |
1. | Li, J., Xu, Z., Xia, Y. et al. Strategy for preparing nanocrystalline Ta-N gradient layer with enhanced mechanical and tribological performance via microwave plasma nitriding. Ceramics International, 2024, 50(21): 41636-41647. DOI:10.1016/j.ceramint.2024.08.013 |
2. | Gao, X., Liu, J., Bo, L. et al. Achieving superb mechanical properties in CoCrFeNi high-entropy alloy microfibers via electric current treatment. Acta Materialia, 2024. DOI:10.1016/j.actamat.2024.120203 |
3. | Li, B., Zhang, X., Tang, S. et al. Influence of spraying power on microstructure, phase composition and nanomechanical properties of plasma-sprayed nanostructured Yb-silicate environmental barrier coatings. Surface and Coatings Technology, 2024. DOI:10.1016/j.surfcoat.2024.130450 |
4. | Wang, Z., Niu, S., Lou, M. et al. The Joint Formation Mechanism, Microstructure, and Mechanical Performance of Resistance Rivet-Welded Mg/Steel Joints. Journal of Materials Engineering and Performance, 2024. DOI:10.1007/s11665-024-10611-6 |
5. | Niu, J., Miao, B., Guo, J. et al. Leveraging Deep Neural Networks for Estimating Vickers Hardness from Nanoindentation Hardness. Materials, 2024, 17(1): 148. DOI:10.3390/ma17010148 |
6. | Dong, Z., Pan, R., Zhou, T. et al. Microstructure and mechanical property of Ti/Cu ultra-thin foil lapped joints with different weld depths by nanosecond laser welding. Journal of Manufacturing Processes, 2023. DOI:10.1016/j.jmapro.2023.10.082 |
7. | Sun, H., Yi, G., Wan, S. et al. Effects of Ni-5 wt% Al/Bi2O3 addition and heat treatment on mechanical and tribological properties of atmospheric plasma sprayed Al2O3 coating. Surface and Coatings Technology, 2023. DOI:10.1016/j.surfcoat.2023.129935 |
8. | Mishchenko, Y., Patnaik, S., Wallenius, J. et al. Thermophysical properties and oxidation behaviour of the U0.8Zr0.2N solid solution. Nuclear Materials and Energy, 2023. DOI:10.1016/j.nme.2023.101459 |
9. | Zakaryan, M.K., Malakpour Estalaki, S., Kharatyan, S. et al. Spontaneous Crystallization for Tailoring Polymorphic Nanoscale Nickel with Superior Hardness. Journal of Physical Chemistry C, 2022, 126(29): 12301-12312. DOI:10.1021/acs.jpcc.2c03612 |
10. |
Stekovic, S., Romero-Ramirez, R., Selegård, L. Effect of Nitriding on Microstructure and Mechanical Properties on a Ti64 Alloy for Aerospace Applications. 2022.
![]() |
11. | Kumar, R.R., Gupta, R.K., Sarkar, A. et al. Vacuum diffusion bonding of α‑titanium alloy to stainless steel for aerospace applications: Interfacial microstructure and mechanical characteristics. Materials Characterization, 2022. DOI:10.1016/j.matchar.2021.111607 |
12. | Sun, H., Yi, G., Wan, S. et al. Effect of Cr2O3 addition on mechanical and tribological properties of atmospheric plasma-sprayed NiAl-Bi2O3 composite coatings. Surface and Coatings Technology, 2021. DOI:10.1016/j.surfcoat.2021.127818 |
13. | Raj, M., Prasad, M.J.N.V., Narasimhan, K. Microstructure and Mechanical Properties of Ti-6Al-4V Alloy/Interstitial Free Steel Joint Diffusion Bonded with Application of Copper and Nickel Interlayers. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2020, 51(12): 6234-6247. DOI:10.1007/s11661-020-06002-w |