Deposition of stain resistance coating by non-thermal plasma brush application to dental whitening

Yu XU (徐雨); Xiaoqing DONG (董晓庆); Xueyan LI (李雪艳); Meng CHEN; Jing ZHANG (张菁); Qingsong YU

doi:10.1088/2058-6272/ab033a

Plasma Science and Technology > 2019 > 21(6): 65501-065501. > DOI: 10.1088/2058-6272/ab033a

Yu XU (徐雨), Xiaoqing DONG (董晓庆), Xueyan LI (李雪艳), Meng CHEN, Jing ZHANG (张菁), Qingsong YU. Deposition of stain resistance coating by non-thermal plasma brush application to dental whitening[J]. Plasma Science and Technology, 2019, 21(6): 65501-065501. DOI: 10.1088/2058-6272/ab033a

Citation:

PDF (1627 KB)

Deposition of stain resistance coating by non-thermal plasma brush application to dental whitening

¹ State Key Laboratory for Modification of Chemical Fibers and Polymer Materials and College of Materials Science and Engineering, Donghua University, Shanghai 201620, People’s Republic of China
² Department of Mechanical and Aerospace Engineering, Missouri University, E3411 Lafferre Hall, Columbia, MO 65211, United States of America Stomatology department, Eye and Eat Hospital of Fudan University, Shanghai 200031, People’s Republic of China

More Information

Received Date: September 17, 2018

Graphical Abstract

Abstract

Abstract

A non-thermal plasma brush is employed to deposit stain-resistant SiO₂-like coatings on resin composite fillings and bovine teeth. With post-treating by plasma, the hardness of the coating increases from H to 8H and the water contact angle decreases from 98.8° to 61.7°. The Fourier transform infrared spectroscopy (FTIR) results show that, after plasma post-treating, the Si–O–Si and Si–OH bonds of the coating increase. Scanning electron microscope (SEM) images show the coatings to be uniform, without cracks. The coatings present outstanding performance in a stain resistance test both on resin composite and bovine teeth. Being easy to handle and less time consuming than traditional methods, with a body-friendly temperature and material, this plasma brush provides a promising in-situ coating method on patient teeth in dental clinics.
- non-thermal plasma brush,
- stain-resistant coating,
- dental,
- plasma post-treatment

FullText(HTML)

References (26)

References

[1]	de A Silva M F et al 2006 Dent. Mater. 22 919
[2]	Erta? E et al 2006 Dent. Mater. J. 25 371
[3]	Wilson D et al 2009 J. Mater. Sci.: Mater. Med. 20 1001
[4]	Carey C M 2014 J. Evid. Based Dent. Pract. 14 70
[5]	Kim M S et al 2012 Plasma Process. Polym. 9 339
[6]	Lee H W et al 2010 Plasma Process. Polym. 7 274
[7]	Chen M S et al 2014 Dent. Mater. 30 1369
[8]	Cheng Y C et al 2017 Plasma Process Polym. 14 1600235
[9]	Josey A L et al 1996 J. Oral Rehabil. 23 244
[10]	Nam S H et al 2014 Plasma Process. Polym. 11 1010
[11]	Doray P G, Eldiwany M S and Powers J M 2003 J. Esthet. Restor. Dent. 15 244
[12]	Liu F et al 2013 Appl. Surf. Sci. 280 686
[13]	Li J et al 2012 Appl. Surf. Sci. 261 470
[14]	Morks M F, Fahim N F and Kobayashi A 2008 Appl. Surf. Sci. 255 3426
[15]	Hnilica J et al 2013 J. Phys. D: Appl. Phys. 46 335202
[16]	Guo J C et al 2016 Appl. Surf. Sci. 370 237
[17]	Lee C C et al 2018 Appl. Surf. Sci. 436 690
[18]	Yu Q S et al 2007 J. Biomed. Mater. Res. B: Appl. Biomater. 80B 211
[19]	Chen M S et al 2013 Dent. Mater. 29 871
[20]	International Commission on Illumination 1978 Recommendations on Uniform color Spaces, Color- Difference Equations, Psychometric Color Terms. (Paris: International Commission on Illumination)
[21]	Kesters E et al 2005 Solid State Phenomena 103–104 349
[22]	Shamiryan D et al 2002 J. Vacuum Sci. Technol. B: Microelectronics & Nanometer Structures 20 1923
[23]	Wang R X et al 2016 Appl. Surf. Sci. 367 401
[24]	Mansur H S, Oréfice R L and Mansur A A P 2004 Polymer 45 7193
[25]	Chen P Y, Hu Y and Wei C H 2012 Appl. Surf. Sci. 258 4334
[26]	Momeni M et al 2017 Appl. Surf. Sci. 392 80

Cited By

Cited by

Periodical cited type(4)

1.	Dong, L.-J., Li, C.-D., Peng, J. et al. The Effect of Silica Sol on the Stain Resistance of Exterior Wall Latex Coatings through Natural Exposure to Sunlight. Coatings, 2023, 13(12): 2013. DOI:10.3390/coatings13122013
2.	Zhang, Y., Wang, H., He, T. et al. The effects of radio frequency atmospheric pressure plasma and thermal treatment on the hydrogenation of TiO2 thin film. Plasma Science and Technology, 2023, 25(6): 065504. DOI:10.1088/2058-6272/acb24e
3.	Wu, J.-C., Wu, K.-Y., Jia, B.-Y. et al. Spectral Characteristics of an Argon/Oxygen Plasma Plumes Excited by DC Voltage and Operated Underwater \| [水下运行直流激励大气压辉光放电的光谱特性研究]. Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis, 2020, 40(8): 2500-2504. DOI:10.3964/j.issn.1000-0593(2020)08-2500-05
4.	Heneral, A.A., Avtaeva, S.V. Atmospheric pressure plasma jets generated by the DBD in argon-air, helium-air, and helium-water vapour mixtures. Journal of Physics D: Applied Physics, 2020, 53(19): 195201. DOI:10.1088/1361-6463/ab7354

Other cited types(0)

Get Citation

PDF

XML

Article views (142) PDF downloads (208) Cited by(4)

Turn off MathJax

Article Contents

Abstract

References

Deposition of stain resistance coating by non-thermal plasma brush application to dental whitening

Abstract

References

Cited by

Periodical cited type(4)

Other cited types(0)

Catalog

Export File

Citation

Format

Content