Effect of Spraying Parameters on the Microstructure and Mechanical Properties of Micro-Plasma Sprayed Alumina-Titania Coatings

LIU Gu; WANG Liuying; CHEN Guiming; HUA Shaochun; ZHU Erlei

Plasma Science and Technology > 2011 > 13(4): 474-479.

LIU Gu, WANG Liuying, CHEN Guiming, HUA Shaochun, ZHU Erlei. Effect of Spraying Parameters on the Microstructure and Mechanical Properties of Micro-Plasma Sprayed Alumina-Titania Coatings[J]. Plasma Science and Technology, 2011, 13(4): 474-479.

Citation:

PDF (642 KB)

Effect of Spraying Parameters on the Microstructure and Mechanical Properties of Micro-Plasma Sprayed Alumina-Titania Coatings

1 Xi'an Hi-Tech Research Institute, Xi'an 710025, China
2 Key Laboratory of Electronic Ceramics and Devices of Ministry of Education, Xi’an Jiaotong University, Xi'an 710049,China

More Information

Received Date: December 15, 2010

Graphical Abstract

Abstract

Abstract

Electrical property of a micro-plasma spray system with different working-gas feeding schemes were tested to optimize the plasma spray process. The arc voltage with an integrated gas injection mode is higher than that with radial injection or axial injection modes. Thus, an integrated gas injection mode with an excellent electrical characteristic was adopted to deposit alumina-titania coating. The microstructure, bonding strength and hardness of the plasma sprayed alumina-titania coating, as a function of the spraying parameters, e.g.,plasma current, gas flow rate and gas pressure, was studied. It was shown that the spraying parameters affected remarkably on the microstructure of the coating. Different tendencies in bonding strength and hardness were also shown for different spraying parameters. At an arc current of 250 A, a gas flow rate of 20 l/min and a gas pressure of 0.5 MPa, the bonding strength and micro-hardness of the coatings reach 40.6 MPa and HV1406.1, respectively.
- Micro-plasma spray,
- Voltage-current characteristic,
- Spraying parameters,
- Micro-structure,
- Mechanical properties

FullText(HTML)

References (0)

[1]	Chundong HU (胡纯栋), Yongjian XU (许永建), Yuanlai XIE (谢远来), Yahong XIE (谢亚红), Lizhen LIANG (梁立振), Caichao JIANG (蒋才超), Sheng LIU (刘胜), Jianglong WEI (韦江龙), Peng SHENG (盛鹏), Zhimin LIU (刘智民), Ling TAO (陶玲), the NBI Team. Thermal analysis of EAST neutral beam injectors for long-pulse beam operation[J]. Plasma Science and Technology, 2018, 20(4): 45602-045602. DOI: 10.1088/2058-6272/aaa4f0
[2]	Zhimin LIU (刘智民), Caichao JIANG (蒋才超), Junjun PAN (潘军军), Sheng LIU (刘胜), Yongjian XU (许永建), Shiyong CHEN (陈世勇), Chundong HU (胡纯栋), NBI Team. Long-pulse power-supply system for EAST neutral-beam injectors[J]. Plasma Science and Technology, 2017, 19(5): 55602-055602. DOI: 10.1088/2058-6272/aa57f2
[3]	HU Chundong (胡纯栋), CHEN Yu (陈宇), XU Yongjian (许永建), YU Ling (于玲), LI Xiang (栗翔), ZHANG Weitang (张为堂), NBI Group. Analysis of the Pipe Heat Loss of the Water Flow Calorimetry System in EAST Neutral Beam Injector[J]. Plasma Science and Technology, 2016, 18(11): 1139-1142. DOI: 10.1088/1009-0630/18/11/13
[4]	CHANG Pengxiang (常鹏翔), WU Bin (吴斌), WANG Jinfang (王进芳), LI Yingying (李颖颖), WANG Xiaoguang (王小光), XU Handong (徐旵东), WANG Xiaojie (王晓洁), LIU Yong (刘永), ZHAO Hailin (赵海林), HAO Baolong (郝宝龙), YANG Zhen (杨振), ZHENG Ting (郑婷), HU Chundong (胡纯栋). The Influence of Neutral Beam Injection on the Heating and Current Drive with Electron Cyclotron Wave on EAST[J]. Plasma Science and Technology, 2016, 18(11): 1064-1068. DOI: 10.1088/1009-0630/18/11/02
[5]	CHEN Gen (陈根), QIN Chengming (秦成明), MAO Yuzhou (毛玉周), ZHAO Yanping (赵燕平), YUAN Shuai (袁帅), ZHANG Xinjun (张新军). Power Compensation for ICRF Heating in EAST[J]. Plasma Science and Technology, 2016, 18(8): 870-874. DOI: 10.1088/1009-0630/18/8/14
[6]	WU Xingquan (伍兴权), WAN Baonian (万宝年), LYU Bo (吕波), WU Bin (吴斌), WANG Jinfang (王进芳), HU Chundong (胡纯栋). Calculation of Neutral Beam Injected Torque and Its Effective Tangency Major Radius for EAST[J]. Plasma Science and Technology, 2015, 17(7): 545-551. DOI: 10.1088/1009-0630/17/7/04
[7]	HU Chundong(胡纯栋), NBI Team. Conceptual Design of Neutral Beam Injection System for EAST[J]. Plasma Science and Technology, 2012, 14(6): 567-572. DOI: 10.1088/1009-0630/14/6/30
[8]	LI Jibo(李吉波), DING Siye(丁斯晔), WU Bin(吴斌), HU Chundong(胡纯栋). Simulations of Neutral Beam Ion Ripple Loss on EAST[J]. Plasma Science and Technology, 2012, 14(1): 78-82. DOI: 10.1088/1009-0630/14/1/17
[9]	HU Chundong (胡纯栋), LIANG Lizhen (梁立振), XIE Yuanlai (谢远来), WEI Jianglong (韦江龙), XIE Yahong (谢亚红), LI Jun (李军), LIU Zhimin (刘智民), LIU Sheng (刘胜), JIANG Caichago (蒋才超), SHENG Peng (盛鹏), XU Yongjian (许永建). Design of Neutral Beam-Line of EAST[J]. Plasma Science and Technology, 2011, 13(5): 541-545.
[10]	WANG Liang, XU Guosheng, CHANG Jiafeng, ZHANG Wei, YAN Ning, DING Siye..... Study of Scrape-Off-Layer Width in Ohmic and Lower Hybrid Wave Heated Double-Null Divertor Plasma in EAST[J]. Plasma Science and Technology, 2011, 13(4): 435-439.