Collaborative Simulation and Testing of the Superconducting Dipole Prototype Magnet for the FAIR Project

Zhu Yinfeng (朱银锋); ZHU Zhe(朱哲); XU Houchang(徐厚昌); WU Weiyue(吴维越)

doi:10.1088/1009-0630/14/8/15

Plasma Science and Technology > 2012 > 14(8): 765-770. > DOI: 10.1088/1009-0630/14/8/15

Zhu Yinfeng (朱银锋), ZHU Zhe(朱哲), XU Houchang(徐厚昌), WU Weiyue(吴维越). Collaborative Simulation and Testing of the Superconducting Dipole Prototype Magnet for the FAIR Project[J]. Plasma Science and Technology, 2012, 14(8): 765-770. DOI: 10.1088/1009-0630/14/8/15

Citation:

PDF (2059 KB)

Collaborative Simulation and Testing of the Superconducting Dipole Prototype Magnet for the FAIR Project

1 Tokamak Design Division, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China
2 School of Mechanical and Electrical Engineering, Anhui University of Architecture, Hefei 230601, China
3 Mechanical Engineering Department, Hefei University, Hefei 230022, China

Funds: Supported by ASIPP under contract MOU-GSI-ACC-2005-01, the Special Fund of Talent Development of Anhui Province (No.2009Z056), the Research Fund for the Doctoral Program of Anhui University of Architecture (No.K02425), and the Fund of Anhui Educational Committee (No.KJ2010B036).

More Information

Received Date: March 20, 2011

Graphical Abstract

Abstract

Abstract

The superconducting dipole prototype magnet of the collector ring for the Facility for Antiproton and Ion Research (FAIR) is an international cooperation project. The collaborative simulation and testing of the developed prototype magnet is presented in this paper. To evaluate the mechanical strength of the coil case during quench, a 3-dimensional (3D) electromagnetic (EM) model was developed based on the solid97 magnetic vector element in the ANSYS commercial software, which includes the air region, coil and yoke. EM analysis was carried out with a peak operating current at 278A. Then, the solid97 element was transferred into the solid185 element, the coupled analysis was switched from electromagnetic to structural, and the finite element model for the coil case and glass-fiber reinforced composite (G10) spacers was established by the ANSYS Parametric Design Language based on the 3D model from the CATIA V5 software. However, to simulate the friction characteristics inside the coil case, the conta174 surface-to-surface contact element was established. The results for the coil case and G10 spacers show that they are safe and have sufficient strength, on the basis of testing in discharge and quench scenarios.
- collaborative simulation,
- superconducting dipole magnet,
- FAIR,
- coil case,
- yoke

FullText(HTML)

References (0)

[1]	S J KIM, J J LEE, Y S LEE, J H KIM, S J YOU. Computational study on influence of RF shielding box on inductance of coil[J]. Plasma Science and Technology, 2019, 21(6): 64004-064004. DOI: 10.1088/2058-6272/ab0d42
[2]	LUO Zhiren (罗志仁), LIU Xufeng (刘旭峰), DU Shuangsong (杜双松), WANG Zhongwei (王忠伟), SONG Yuntao (宋云涛). Integrated Design System of Toroidal Field Coil for CFETR[J]. Plasma Science and Technology, 2016, 18(9): 960-966. DOI: 10.1088/1009-0630/18/9/14
[3]	CHENG Anyi (成安义), ZHANG Qiyong (张启勇), FU Bao (付豹), LU Xiaofei (陆小飞). Process Design of Cryogenic Distribution System for CFETR CS Model Coil[J]. Plasma Science and Technology, 2016, 18(2): 202-205. DOI: 10.1088/1009-0630/18/2/18
[4]	WU Jinglin(吴景林), LONG Jiaojiao(龙佼佼), LIU Xiaoning(刘小宁). Study on a Highly Stabilized Power Supply for Hybrid-Magnet Superconducting Outsert[J]. Plasma Science and Technology, 2014, 16(9): 890-896. DOI: 10.1088/1009-0630/16/9/15
[5]	ZHANG Shanwen(张善文), SONG Yuntao(宋云涛), WANG Zhongwei(王忠伟), LU Su(卢速), JI Xiang(戢翔), DU Shuangsong(杜双松), LIU Xufeng(刘旭峰), FENG Changle(冯昌乐), YANG Hong(杨洪), WANG Songke(王松可), LUO Zhiren(罗志仁). Mechanical Analysis and Optimization of ITER Upper ELM Coil & Feeder[J]. Plasma Science and Technology, 2014, 16(8): 794-799. DOI: 10.1088/1009-0630/16/8/11
[6]	YANG Hong(杨洪), SONG Yuntao(宋云涛), WANG Zhongwei(王忠伟). Thermal and Hydraulic Analysis of the ITER Upper Vertical Stabilization Coil[J]. Plasma Science and Technology, 2014, 16(7): 706-711. DOI: 10.1088/1009-0630/16/7/13
[7]	XIA Donghui (夏冬辉), HUANG Mei (黄梅), ZHOU Jun (周俊), et al.. The 5.8 T Cryogen-Free Gyrotron Superconducting Magnet System on HL-2A[J]. Plasma Science and Technology, 2014, 16(4): 410-414. DOI: 10.1088/1009-0630/16/4/20
[8]	ZHANG Shanwen(张善文), SONG Yuntao(宋云涛), WANG Zhongwei(王忠伟), JI Xiang(戢翔), E. DALY, M. KALISH, LU Su(卢速), DU Shuangsong(杜双松), LIU Xufeng(刘旭峰), FENG Changle(冯昌乐), YANG Hong(杨洪), WANG Songke(王松可). Design of Tokamak ELM Coil Support in High Nuclear Heat Environment[J]. Plasma Science and Technology, 2014, 16(3): 300-304. DOI: 10.1088/1009-0630/16/3/23
[9]	MA Keyan (马克岩), YANG Dong (杨东), LU Jingbin (陆景彬), WANG Lielin (王烈林), WANG Huidong (王辉东), LIU Yunzuo (刘运祚), LIU Gongye (刘弓冶), LI Li (李黎), MA Yingjun (马英君), YANG Sen (杨森), LIU Shan (刘珊), et al. Magnetic dipole band in ¹¹³In[J]. Plasma Science and Technology, 2012, 14(5): 399-401. DOI: 10.1088/1009-0630/14/5/13
[10]	HE Peng (何鹏), CHEN Zhuomin (陈灼民), CHEN Wenge (陈文革), TAN Yunfei (谭运飞), PAN Yinnian (潘引年), WANG Futang (王福堂), KUANG Guangli (匡光力). Calculation of AC Losses of CICC for Superconducting Outsert Coils in a Hybrid Magnet[J]. Plasma Science and Technology, 2010, 12(5): 636-640.